top of page

Helicopter Upgrades & Mission Conversion

​

Transform your helicopter into a mission‑ready platform—safely, quickly, and in full compliance with aviation standards. We plan, supply, integrate, test, certify, and support comprehensive upgrade packages for civil and government operators worldwide.

​

What we do

​

  • End‑to‑end project delivery: needs analysis → engineering & design → sourcing → installation → ground/flight test → documentation & certification → training → through‑life support.

  • Multi‑mission conversions (SAR, EMS/HEMS, firefighting, utility, maritime patrol, training, surveillance, law enforcement).

  • Turnkey kits and bespoke integrations across avionics, mission sensors, communications, lighting, safety systems, and external‑load equipment.

  • Global logistics for aircraft, spares, and tooling; on‑site or partner‑facility installation.

 

Upgrade packages by system

​

1) Avionics & Navigation Suite

​

Objective: Modernize cockpit for IFR/VFR, improve situational awareness, and enhance reliability.

​

Typical scope

​

  • Integrated GPS/NAV/COMM with MFD/flight map (e.g., GTN‑series).

  • VOR/ILS/LOC indicators and nav antennas.

  • Certified GPS antennas and cabling; rack/kit provisioning.

  • Terrain and traffic awareness options; ADS‑B solutions.

  • Wiring, mounting, harness fabrication, EMI/EMC validation.

 

Deliverables

​

  • Updated cockpit layout, weight & balance, and wiring diagrams.

  • Ground & flight tests; pilot acceptance.

  • Compliance package for local CAA/DOA/DER sign‑off (e.g., STC/Minor Mod, as applicable).

 

2) Communications & Data

​

Objective: Clear, reliable air‑to‑air/air‑to‑ground communications and mission data exchange.

​

Typical scope

​

  • VHF/AM/FM radios, intercom and audio panels; optional satcom/Iridium.

  • Antenna layouts, bonding & lightning protection checks.

  • Recording/mission data interfaces where required.

 

3) NVIS/NVG‑Compatible Lighting

​

Objective: Safe night‑operations with night‑vision devices.

​

Typical scope

​

  • Adaptation of internal and external lighting to NVIS standards (cockpit, cabin, formation, position, anti‑collision, utility).

  • Filtered/modified panels, dimming control, and glare management.

  • NVG ground checks and night validation flights.

 

Training

​

  • Crew training modules covering NVG procedures, human factors, and night operations.

 

4) GPS Resilience / Anti‑Jamming

​

Objective: Maintain PNT (positioning, navigation, timing) performance in contested RF environments.

 

Typical scope

​

  • Controlled‑reception pattern antenna (CRPA) solutions and anti‑jamming electronics.

  • Mechanical integration (masts/fairings), RF cabling, and system power/grounding.

  • Lab and on‑aircraft calibration; performance verification.

 

Options

​

  • Multi‑element CRPA antennas and integrated GAJT‑class units.

  • Integration with existing FMS/INS for robust navigation.

 

5) Mission Sensors & Surveillance

​

Objective: Enhance detection, identification, and monitoring for SAR, maritime patrol, and law‑enforcement tasks.

​

Typical scope

​

  • Maritime search radar integration with onboard INS/air data systems.

  • Console/indicator placement, structural supports, and power conditioning.

  • Antenna siting studies, radome/fairing design, and EMI/EMC qualification.

  • Data recording and operator HMI ergonomics.

 

Outcomes

​

  • Extended surface search, small‑target detection, shoreline/EEZ monitoring, cueing for hoist/boat teams.

 

6) Firefighting & External‑Load Systems

​

Objective: Rapid conversion for aerial firefighting and utility missions.

 

Typical scope

​

  • External cargo hooks and release locks, load‑cell/weighing devices, and long‑lines.

  • Quick‑fit water buckets (e.g., multi‑capacity Bambi‑type) with spare kits and packing cases.

  • Crew procedures, bucket handling, and safety training.

 

Deliverables

​

  • Structural substantiation for hook points, wiring diagrams, and supplement to the aircraft flight manual (AFMS) as required.

  • Functional tests and sling‑load flight checks.

 

7) Safety Enhancements

​

Objective: Reduce operational risk and improve fleet compliance.

 

Typical scope

​

  • TAWS/HTAWS, traffic systems, ADS‑B Out/In.

  • Health & usage monitoring (HUMS) options.

  • Enhanced lighting and annunciation, ELT upgrades.

 

8) Airframe, Engine & Drive‑Train Support

​

Objective: Extend service life and dispatch reliability.

​

Typical scope

​

  • Coordination of engine/APU overhauls and MRO workscopes.

  • Scheduled/unscheduled maintenance and component replacements.

  • Spares provisioning and rotables exchange.

 

Training & Knowledge Transfer

​

  • Flight crew: aircraft systems, avionics, NVG operations, performance & procedures.

  • Maintenance personnel: avionics integration, troubleshooting, scheduled tasks.

  • On‑site and classroom formats; multilingual materials as required.

 

Documentation, Certification & Testing

​

  • Engineering drawings, ICDs, W&B, structural and electrical substantiation.

  • Test plans (ground/flight), conformity inspections, and reports.

  • Support for approvals (e.g., STC/Minor Change) in coordination with the local civil aviation authority.

  • Illustrated parts and maintenance supplements where applicable.

 

Project Delivery Workflow

​

  1. Requirements & survey (mission profile, environment, regulatory pathway).

  2. System design (architecture, mounting, power/RF, human factors).

  3. Sourcing & logistics (OEM equipment, spares, tooling, shipping).

  4. Installation & integration (partner facility or customer site).

  5. Ground/flight testing (acceptance criteria, sign‑offs).

  6. Certification (documentation/approvals).

  7. Handover & training (crew/maintenance).

  8. Sustainment (warranty, parts, and technical support).

 

Platforms & Facilities

​

  • Support for a wide range of light, medium, and heavy twin helicopters from Western and Eastern manufacturers, subject to regulatory and export‑control compliance.

  • Work performed at approved partner facilities or at customer sites by agreement.

 

Export‑Control & Compliance

 

We conduct all projects in compliance with applicable Canadian, U.S., EU, and local laws and regulations, including export‑control and sanctions regimes. End‑use/end‑user documentation may be required. We do not engage with prohibited end‑uses or end‑users.

 

Why choose us

​

  • Turnkey delivery with a single point of accountability.

  • Proven partner network in North America and Europe.

  • Rapid execution with practical, maintainable solutions.

  • Lifecycle support—from concept to sustainment.

 

Ready to scope your upgrade?

​

Contact us with your platform, mission profile, operating environment, and timeline. We’ll propose a tailored work‑scope, schedule, and budget, along with the certification path appropriate to your jurisdiction.

bottom of page